graduate student
Kazan, Kazan, Russian Federation
employee
Kazan, Kazan, Russian Federation
student
Kazan, Kazan, Russian Federation
UDK 666.3 Керамика в целом. Керамическое сырье
BBK 351 Основные процессы и аппараты химической технологии
The paper presents a study of the effect of low-pressure high-frequency (HF) discharge plasma on technical alumina ceramics in order to increase bending adhesive strength, tensile strength and modulus of elasticity. It is shown that the marginal angle of wetting ceramic products with water after plasma exposure decreased from 83 to 21°, the bending strength increased by 27 %, and the bending modulus of elasticity increased by 6 %. Using AFM studies of the surface of alumina ceramics, it is found out that as a result of exposure to plasma from a low-pressure discharge, the grain structure changes, as well as adhesive strength increases.
alumina ceramics, plasma, discharge, pressure
1. Abyzov AM. Aluminum oxide and aluminum oxide ceramics (review). Properties of Al2O3 and industrial production of dispersed Al2O3. Novye Ogneupory (New Refractories). 2019;1:16-23.
2. Fedotov AV, Dorokhov AS, Kolev DA. Prospects of using ceramic materials for the needs of agriculture. Machinery Technical Service. 2021;2:91-102.
3. Maslyaev SA. Damage to aluminum oxide by powerful pulsed streams of ions, plasma and laser radiation. Physics and Chemistry of Materials Treatment. 2015;3:5-17.
4. Kostenko VA. Study of micro- and nanohardness of alumina ceramics after treatment with powerful pulsed ion beams. Collection of selected papers of TUSUR scientific session. Tomsk. 2018;1(2):102-105.
5. Romanov IG, Tsareva IN. High-power pulsed ion beam modification of the surface properties of alumina ceramics. Technical Physics Letters. 2001;27:695-697.
6. Gyngazov SA. Surface modification of alumina ceramics by argon ion beam. Perspektivnye Materialy. 2018;8:61-71.
7. Stepanov EI, Grigoriev MV, Kirko VI. Influence of ultrafine Al2O3 additives on the physical and mechanical properties of alumina ceramics. Journal of Siberian Federal University. Engineering and Technologies. 2008;1(2):162-167.
8. Malikova EV. Influence of yttrium and magnesium oxides additives on the characteristics of alumina armor ceramics. Refractories and Technical Ceramics. 2013;4-5:35-39.
9. Abdullin ISh, Zheltukhin VS, Nekrasov IK. Features of forming a layer of positive charge during modification of products in a high-frequency capacitive discharge jet under dynamic vacuum conditions. Physics and Chemistry of Materials Treatment. 2024;1:30-40.
10. Grishanova IA, Sergeeva EA, Ilyushina SV, Shaekhov MF. Influence of the nature and composition of the plasma-forming medium on the physical and mechanical properties of high-modulus polyethylene fibers. Vestnik Kazanskogo Tekhnologicheskogo Universiteta. 2010;10:231-236.
11. Abdullin IS, Zheltukhin VS, Nekrasov IK, Sagitova FR. Modification of the surface of high-modulus polyethylene with low-energy low-intensity ion streams: theory and experiment. PPOR. 2022;23(4):525-543.
12. Abdullin IS, Zheltukhin VS, Nekrasov IK, Sagitova FR. Experimental and theoretical study of the interaction of a low-energy ion flow with chemical fibers. High Energy Chemistry. 2023;57(1):132-136.
13. Abdullin IS, Zheltukhin VS, Kashapov NF. High-frequency plasma-jet processing of materials at low pressures. Theory and practice of application. Kazan: Kazan University Publishing House; 2000.
