Gomel Car House Gomel Branch of Belarusian Railway (Process Engineer)
Gomel, Belarus
employee
Gomel, Belarus
employee
Gomel, Belarus
UDK 620.179.1 Методы испытаний без разрушения. Дефектоскопия
BBK 393 Автодорожный транспорт
By applying nondestructive testing at various stages of the manufacturing process and repairing cars, it is possible to eliminate the cause of the defect in time, adjust the manufacturing process in case of equipment failure, and also find out cause-and-effect relations (factors) affecting the occurrence of defects, on which reliability and efficiency of further technical operation directly depend. At the same time, the downtime of transport is reduced in conditions of both production (during manufacture) and repair (in operation). The paper describes in detail a set of non-destructive testing methods that were used in the repair of an internal combustion engine of a passenger car and contributed to finding a hidden through defect in the form of a crack.
liquid, internal combustion engine, car, control, endoscope, tightness, molding, cylinder, insert, piston, visual inspection, diagnostics, repair
1. Vasiliev AA, Gorin LN, Igoshin DN. Non-destructive testing and the possibility of its application in car repair production. Academy [Internet]. 2017 [cited 2024 Oct 08]. Available from: https://cyberleninka.ru/article/n/nerazrushayuschiy-kontrol-i-vozmozhnost-ego-primeneniya-v-avtoremontnom-proizvodstve
2. Otoka AG, Shlapak PS. Experience of using magnetic powder and capillary methods of non-destructive testing in detecting defects of control objects in the oil industry. PROneft. Professionally about Oil [Internet]. 2023;8(2):147-154. Available from: https://doi.org/10/51890/2587-7399-2023-8-2-147-154 .
3. Otoka AG, Kholodilov OV. Comparison of the revealing ability of capillary and magnetic powder control methods of the locomotive industry of the Belarusian railway. Proceedings of XII International Scientific Practical Conference, 2022: Problems of Transport Safety. Gomel; 2022.
4. Otoka AG, Kartuzov NA, Kholodilov OV. Checking the tightness of pneumatic and gas equipment by bubble method on the example of technological equipment of Gomel car shred. Bulletin of BSUT: Science and Transport. 2023.
5. Guideline on monitoring the tightness of technical devices and structures used and operated at hazardous production facilities. Moscow: Scientific and Technical Center for Safety in Industry; 2012.
6. Dorokhin YuS, Sergeev AN, Ushakov MV. Expertise and diagnostics of facilities and service systems: textbook. Tula: TulSU Publishing House; 2015.
7. Evlampiev AI, Popov ED, Sazhin SG. Tightness control. Moscow: Mashinostroenie; 2003.
8. CCUB 18442-80 STB 1172-99. Non-destructive testing. Control of penetrating substances (capillary). General requirements. Belorus; 2009.
9. Control of penetrating substances. Penetrant and other materials for capillary flaw detection [Internet]. [cited 2024 Oct 13]. Available from: https://defektoskopist.ru/osnovi-nk/penetranty.34
10. Prokhorenko PP. Physical methods of non–destructive testing for the quality of foundry materials. Foundry Production and Metallurgy. 2007;1(41):136-139.
11. Engine repair. Casting of the engine head and cylinder block [Internet]. [cited 2024 Oct 13]. Available from: https://www.zaoair.com/customers/articles/opressovka-golovki-i-bloka-tsilindrov-dvigatelya.
