Gomel, Belarus
Gomel Car House Gomel Branch of Belarusian Railway (Process Engineer)
Gomel, Belarus
UDK 620.17 Испытания механических свойств материалов. Механические испытания
BBK 392 Железнодорожный транспорт
The paper clearly shows some tests of cogged wheels and gears of traction gearboxes of locomotive wheel-motor units and multiple rolling stock for compliance with state standards. The test procedure and control methods for compliance with mechanical properties, hardness, surface quality, micro- and macrostructure are described. The features of magnetic powder technology and capillary non-destructive testing methods for detecting cracks in cogged wheels and bearings are considered. The measuring tools and test equipment, including auxiliary materials used in flaw detection, are given.
cogged wheel, gear, transmission, testing, properties, viscosity, hardness, control, microstructure, macrostructure, strength
1. Fedorov IV, Belgorodtsev VA. Method of accelerated experimental evaluation of flexural fatigue strength in wheels and gears of rolling stock. and gears Proceedings of Petersburg Transport University. 2016;4:553-560.
2. Kuznetsov VF, Shantarenko SG. Contact stresses in the gears of the traction gearbox of an electric locomotive wheel-motor block. Izvestia Transsiba. 2011;3(7): 24-29.
3. Morozova LV, Orlov MR. Study of the causes of gear destruction during operation. Aviation Materials and Technologies. 2015;S1:37-48.
4. GOST 30803-2014 Transmission tooth gears of the traction railway stock. Moscow: Standartinform; 2015.
5. Vorobyov VI, Zlobin SN. Application of classifications for the search for new technical solutions: monograph. Orel: OSU; 2022.
6. Kosmodamiansky AS, Vorobyov VI. Methods of searching for optimal parameters of a dynamic traction drive system while choosing design options. Izvestia Transsiba. 2019;2(38):90-100.
7. Pavlenko VA, Rybnikov EK. Development of pulling drive computer model for stress state analysis of gear casing. Innovation and Investment. 2019;2:170-174.
8. Veselovsky AA. Research of wear resistance of iron gear wheels with diffuse carbide layer. Vestnik of Ulyanovsk state agricultural academy. 2020;3(51):28 – 32. doi:https://doi.org/10.18286/1816-4501-2020-3-28-32.
9. Antoshchenkov R, Bogdanovich S, Halych I, Cherevatenko H. Determination of dynamic and traction-energy indicators of all-wheel-drive traction-transport machine. Eastern-European Journal of Enterprise Technologies. 2023;1(7(121)):40–47. doi: https://doi.org/10.15587/1729-4061.2023.270988.
10. Wang Z, Wang R, Crosbee D, Allen P, Ye Y, Zhang W. Wheel wear analysis of motor and unpowered car of a high-speed train, Wear; 2019. doi: https://doi.org/10.1016/j.wear.2019.203136.
11. Zhang T, Jin T. Dynamic modeling of a metro vehicle considering the motor-gearbox transmission system under traction conditions / Mech. Sci. 2022;13:603–617. doi: https://doi.org/10.5194/ms-13-603-2022.
12. Wang Z, Mei G, Xiong Q. Motor car–track spatial coupled dynamics model of a high-speed train with traction transmission systems. Mechanism and Machine Theory. 2019;137:386-403.
13. Zhou Z, Chen Z. Dynamic performance of locomotive electric drive system under excitation from gear transmission and wheel-rail interaction. Vehicle System Dynamics. 2021;60(4):1–23. doi:https://doi.org/10.1080/00423114.2021.1876887.
14. Syzrantseva KV, Kolbasin DS. Comparative evaluation of calculated and experimental data on the stress-strain state of cylindrical gearwheel arc teeth. Bulletin of IzhGTU imeni M.T. Kalashnikova. 2021;24(1):45-52. doi:https://doi.org/10.22213/2413-1172-2021-1-45-52.
15. Wang Z, Cheng Y. Torsion vibration analysis of the gear transmission system of high-speed trains with wheel defects. Proc IMechE Part F: J Rail and Rapid Transit 0(0), 2019:0(0):1–11. doi: 10.ǀ ǀ77/09544097 ǀǀ 983379I journals.sagepub.com/home/pif.
16. Sorokina EV, Khomenko AA. Tests of wheels of cylindrical traction gears of rolling stock. Proceedings of the VIII All-Russian Scientific and Technical Conference, 2019: Problems and Prospects of Car Building Development. Bryansk; 2019.
17. Ishin NN, Homan AM. Method of conducting accelerated bench tests of gear drive mechanisms with a minimum number of tested samples. Actual Issues of Machine Science. 2020;9:234-237.
18. GOST 1497-84 Metals. Methods of tension test. Moscow: Standartinform; 2008.
19. GOST 25.507-85 Strength calculations and testing in machine building. Methods of fatigue testing under service loading. General requirements.
20. GOST 33189-2014 Transmission tooth gears of the traction main railway stock. Scale of macro- and microstructure standards. Moscow: Standartinform; 2019.
21. GOST 9013-59 (ISO 6508-86). Metals. Method of measuring Rockwell hardness. Moscow; 2001.
22. Zubchenko AS. Guide of steels and alloys. 2nd ed. Moscow: Mashinostroenie; 2003.
23. GOST 2999-75 (ST SEV 470-77). Metals and alloys. Vickers hardness treat by diamond pyramid. Moscow; 1986.
24. Otoka AG, Shlapak PS. Experience of using magnetic powder and capillary methods of nondestructive testing in detecting defects of control objects in the oil industry [Internet]. PRONEFT. Professionally about Oil. 2023;8(2):149-156. Available from: https://doi.org/10.51890/2587-7399-2023-8-2-149-156 .
