DEVELOPMENT OF INFORMATIVE PARAMETERS TO DIAGNOSE LASER HARDENING OF TYRES
Rubrics: TRANSPORT SYSTEMS
Authors:
1.
Innovative Engineering Center
(the Department of the Directorate of Development Projects, Head)
employee
Moscow, Moscow, Russian Federation
employee
Moscow, Moscow, Russian Federation
2.
Russian University of Transport (MIIT)
(Postgraduate Student)
graduate student
Moscow, Moscow, Russian Federation
graduate student
Moscow, Moscow, Russian Federation
3.
Russian University of Transport (MIIT)
(Department "Technology of Transport Engineering and repair of rolling stock", Associate Professor)
employee
Moscow, Moscow, Russian Federation
employee
Moscow, Moscow, Russian Federation
Type:
Article
Pages:
from 54
to 60
Status:
Published
Received:
05.06.2024
Accepted:
24.06.2024
Published:
30.07.2024
Subject area:
UDK 621.7.02 Предварительная обработка (подготовка) поверхности
BBK 392 Железнодорожный транспорт
BBK 392 Железнодорожный транспорт
Language:
Russian
Keywords:
tyre, wheelset, malfunctions, quality parameters, laser thermal hardening, information systems
Abstract (English):
This study is devoted to the quality of the surface layer of tyres, the analysis of various surface hardening installations and the choice of the optimal machining method, evaluation of various parameters using modern control methods. The advantages of the laser surface thermal hardening method can be noted as the novelty of the research. As a result, informative diagnostic parameters based on the acoustic emission method are formulated.
This study is devoted to the quality of the surface layer of tyres, the analysis of various surface hardening installations and the choice of the optimal machining method, evaluation of various parameters using modern control methods. The advantages of the laser surface thermal hardening method can be noted as the novelty of the research. As a result, informative diagnostic parameters based on the acoustic emission method are formulated.
Keywords:
tyre, wheelset, malfunctions, quality parameters, laser thermal hardening, information systems
tyre, wheelset, malfunctions, quality parameters, laser thermal hardening, information systems
1. Korotin IM. Quality control of heat treatment of metals. Moscow: Vysshaya Shkola; 1980.
2. Rykalin NN, Uglov AA, Kokora AN. Laser processing of metals. Moscow: Mashinostroenie; 1975.
3. Kovalenko VS, editor. Hardening of parts with a laser beam. Kiev: Tekhnika; 1981.
4. Braginsky AP, Evseev DG, Lebedev IV. Recognition of defects by spectral characteristics of acoustic emission. Defektoskopiya. 1984;1:47-54.
