employee
Moscow, Moscow, Russian Federation
employee
Moscow, Moscow, Russian Federation
graduate student
Moscow, Moscow, Russian Federation
graduate student
Moscow, Moscow, Russian Federation
UDK 691.8 Простые готовые строительные детали. Метизы для строительства
BBK 392 Железнодорожный транспорт
The cut of passenger cars due to wear damage to the rolling surface of the wheelset in 2022 is considered. It is found out that the most typical damage is a shelled tread. An analysis of the methods for restoring the rolling profile of wheels showed that the wheel milling with an end mill can be used as a promising one. To assess the effectiveness of the method, metallographic and tribological studies of wheel samples subjected to turning and milling are compared. According to the study results, it is found that when machining samples of wheel steel by end milling, their wear resistance is 22% higher, compared with samples machined by turning, the wear rate of samples of rail steel is lower in a friction pair with milled samples than with turned samples due to a decrease in the friction factor of milling samples.
wheel, passenger car, wear, milling, service life, machining, transport
1. RD VNIIZHT 05.27.2011-2017 Guidance document on the repair and maintenance of wheelsets with axle boxes of freight cars of mainline railways with 1520 mm gauge. 2017 Oct 19.
2. Shishkin AA, Shpika NK. Conversion of wheel turning machines into wheel milling machines. Collection of Scientific Papers; RostIIT: 1967;58:18-22.
3. GOST 11018-2011 Wheel pairs of traction rolling stock of railways with 1520 mm gauge. General technical conditions. Moscow: Standartinform; 2012.
4. Nechepurenko NP. Restoration of railway wheelset profiles by high-performance milling method using end mills [dissertation]. [Rostov-on-Don (RF)]: 1967.
5. Biryukov VP, Gudushauri EG, Fishkov AA. RF Patent for invention No. 2683600 IPC G01N 3/56 (2006.01). Method for measuring the wear of metal materials and coatings: No. 2018118990. 2019 March 29.
