DEVELOPMENT OF ASH-FREE EXTREME PRESSURE ADDITIVES
Abstract and keywords
Abstract (English):
The physicochemical and tribological parameters of the ash-free additives obtained in the laboratory are given. It is shown that they have high extreme pressure properties and low ash content. The results of comparative laboratory tests of tribo-engineering characteristics of new additives of Russian and foreign production are presented. It is found out that the new additives in terms of maximum load capacity are not worse than imported analogues and can be used to increase the extreme pressure properties of lubricants for various purposes (including ash-free ones) instead of their imported analogues. A pilot batch of additives containing 45% sulfur is prepared and tested.

Keywords:
lubricants, properties, ash-free additives, testing, import substitution
References

1. Zolotov VA. Additives to lubricants. Tribology. Status and prospects. Collection of Scientific Papers. Ufa: RIK UGATU; 2019.

2. Anisimov IG, Badyshtova KM, Bnatov SA. Fuels, lubricants, technical liquids. Assortment and application: handbook Moscow: Publishing center Techinform; 1999.

3. Yakunina KA. Action mechanism and increasing the effectiveness of oil-soluble anti-wear additives [abstract of dissertation]. [Chelyabinsk (RF)]; 2022.

4. Gurev AA, Fuks IG, Lakhshi VL. Chemmotology. Moscow: Khimiya; 1986.

5. Sholom VYu, Abramov AN, Tyulenev DG. Multifunctional Rosoil lubricants. Proceedings of the XII All-Russian Congress on Fundamental Problems of Theoretical and Applied Mechanics. Ufa: BashGU Publishing House; 2019.

6. Sholom VYu, Belov IB, Abramov AN. Lubricants of Rosoil series. Proceedings of the XII All-Russian Congress on Fundamental Problems of Theoretical and Applied Mechanics. Ufa: BashGU Publishing House; 2019.

Login or Create
* Forgot password?