IMPROVEMENT OF MACHINING CORROSION-RESISTANT STAINLESS STEELS
Rubrics: MECHANICAL ENGINEERING
Authors:
1.
Komsomolsk-upon Amur State University
(department “Mechanical Engineering”, Professor)
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
2.
Komsomolsk-upon-Amur State University
(Department “Mechanical Engineering”, Associate Professor)
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
Komsomolsk-upon-Amur, Khabarovsk, Russian Federation
3.
Komsomolsk-on-Amur State University
(Vice-Rector for Science)
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
4.
Komsomolsk-on-Amur State University
(Associate Professor)
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
Komsomolsk-on-Amur, Khabarovsk, Russian Federation
Type:
Article
Pages:
from 26
to 39
Status:
Published
Received:
13.04.2023
Accepted:
16.06.2023
Published:
28.07.2023
Subject area:
VAC 2.5.6 Технология машиностроения
UDK 621.9 Обработка резанием (снятием стружки).Резка (разделительные операции без образования стружки).Дробление и измельчение.Обработка листового материала.Изготовление резьбы и т.д. Способы (технология), инструменты, машины и приспособления
UDK 621.91.01 Теория и основы обработки резанием (снятием стружки), обрабатываемость, влияющие факторы и т.д.
BBK 345 Общая технология машиностроения. Обработка металлов
UDK 621.9 Обработка резанием (снятием стружки).Резка (разделительные операции без образования стружки).Дробление и измельчение.Обработка листового материала.Изготовление резьбы и т.д. Способы (технология), инструменты, машины и приспособления
UDK 621.91.01 Теория и основы обработки резанием (снятием стружки), обрабатываемость, влияющие факторы и т.д.
BBK 345 Общая технология машиностроения. Обработка металлов
Language:
Russian
Keywords:
forecasting, period, durability, tool, simulation modeling
Funding:
the work is carried out with the support of the grant of the Russian Science Foundation No. 23-29-00393, https://rscf.ru/project/23-29-00393/.
Abstract (English):
The methodology and results of the application of the newly developed coatings on hard alloy VK8 for turning corrosion-resistant steels of grades 12X18N10T, 13X15N5 AM-3, 09X17N7YU are considered. The purpose of the work: to increase the durability period of turning tools when applying coatings. Research results: coatings have been developed for a hard alloy of the VK8 brand, which increase the durability period of the incisors by 3 times. Conclusion: the simplest and most affordable solution to increase the tool durability period when turning steel 09H17N7YU is coating by condensation with ion bombardment (CIB). Novelty of the work: a new approach has been formed to increase the durability period of a metal-cutting carbide tool, based on modeling the cutting process in the deform software environment.
The methodology and results of the application of the newly developed coatings on hard alloy VK8 for turning corrosion-resistant steels of grades 12X18N10T, 13X15N5 AM-3, 09X17N7YU are considered. The purpose of the work: to increase the durability period of turning tools when applying coatings. Research results: coatings have been developed for a hard alloy of the VK8 brand, which increase the durability period of the incisors by 3 times. Conclusion: the simplest and most affordable solution to increase the tool durability period when turning steel 09H17N7YU is coating by condensation with ion bombardment (CIB). Novelty of the work: a new approach has been formed to increase the durability period of a metal-cutting carbide tool, based on modeling the cutting process in the deform software environment.
Keywords:
forecasting, period, durability, tool, simulation modeling
forecasting, period, durability, tool, simulation modeling
1. Grigoryev SN, Tabakov VP, Volosova MA. Technological methods of increasing the wear resistance of contact pads of cutting tools: monograph. Stary Oskol: TNT; 2011.
2. Krivoruchko DV, Zaloga VA. Modeling of cutting processes by the finite element method: methodological foundations: monograph. Sumy: Universitetskaya Kniga; 2012.
3. Petrushin SI. Fundamentals of generation of geometry by cutting with edge tools. Tomsk: TPU Publishing House; 2004.
