employee
A-RSRI "Signal" (Design Manager, Deputy General Director for Science)
employee from 01.01.2020 until now
Kovrov, Vladimir, Russian Federation
from 01.01.2000 until now
Kovrov, Vladimir, Russian Federation
VAC 2.5.10 Гидравлические машины, вакуумная, компрессорная техника, гидро- и пневмосистемы
UDK 62-82 c гидравлическим приводом (гидравлические)
UDK 004.94 Компьютерное моделирование
BBK 344 Общее машиностроение. Машиноведение
The study objective is to improve the operational characteristics of hydraulic drives. The task to which the paper is devoted is to simulate operating processes and minimize the vibrations of the drive hydraulic and mechanical components based on the analysis of the main types of generators and dissipators of acoustic vibrations in hydraulic systems. Research methods: analysis of complex multidisciplinary models of hydraulic machine operating processes. Macro-models provide solutions to problems at the system level. Micro-models provide an analysis of the operating processes of hydraulic drives, taking into account the influence of internal and external factors of impact operating, the interaction of components and parts, changes in structural and technological parameters. The novelty of the work is in the substantiation of the influence of operational factors, structural and technological parameters on the vibration processes that form the acoustic characteristics of the hydraulic drive. The results of the study are presented on the example of reducing the vibration processes of an axial plunger hydraulic machine. Fluctuations in the operating pressure are given in the indicator diagram. The vibration amplitude depends on the dead volume of the piston chamber, as well as due to its under-filling operation at low temperatures. Also, based on the simulation results, zones of energy dissipation of the working fluid are localized to reduce vibration processes. Conclusions: the obtained results of modeling various measures to reduce the vibration processes will allow to localize and reduce the negative factors of noise generation.
hydraulic drive, acoustic parameters of hydraulic systems, modeling, vibrations
1. Bashta TM, Rudnev SS, Nekrasov BB. Hydraulics, hydraulic machines and hydraulic drives: textbook for engineering universities. 4th ed. Moscow: Publishing house Alliance; 2010.
2. SanPiN 1.2.3685-21 Hygienic standards and requirements for ensuring the safety and (or) harmlessness of environmental factors for humans. 2021 Jan 28.
3. Mannesmann Rexroth. Design and construction of hydraulic installations: training course on hydraulics. Lohr am Main; 1988.
4. Chilikin AA, Trushin NN. Comparative analysis of modern methods for diagnostics of hydraulic systems. Izvestiya Tula State University. Technical Sciences. 2014;3:117-127.
5. Kruk AR, Egorov AL, Kostyrchenko VA, Madyarov TM. Review of methods for monitoring the state of hydraulic drive elements. Fundamental Research. 2016;2(2):267-270.
6. Kim T, Ivantysynova M Active vibration/noise control of axial piston machine using swash plate control. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control.; 2017.
7. Kiselev M, Pronyakin V, Tulekbaeva A. Technical diagnostics functioning machines and mechanisms. IOP Conference Series: Materials Science and Engineering. 2018;312:012012. DOIhttps://doi.org/10.1088/1757-899X/312/1/012012 .
8. Chmil VP. Gidropneumoprivod: monograph. Saint Petersburg: SPbGASU; 2010.
9. Puzanov AV, Darsht YaA. Modeling of operating processes of hydraulic power drives of unmanned vehicles. Mathematical modeling: Abstracts of the II International Conference; 2021. Moscow: Publishing house Pero; 2021.
10. Puzanov AV. Calculation of interacting the working fluid with the deformed walls of the chassis friction pairs of volumetric hydraulic machines. Spravochnik. Engineering Journal with an Appendix. 2016;6(231):21-25. DOI:https://doi.org/10.14489/hb.2016.06.pp.021-025.
11. Puzanov AV. Hydromechanical analysis of the undercarriage of an axial piston hydraulic machine. Bulletin of Bryansk State Technical University. 2016;4(52):161-169. DOIhttps://doi.org/10.12737/23208.
12. Puzanov AV, Sukorkina OO, Ershov EA. Modeling of pumping equipment operability in Arctic operating conditions. Avtomatizatsiya. Sovremennie Tekhnologii. 2020;74(3):108-111. DOIhttps://doi.org/10.36652/0869-4931-2020-74-3-108-111.
13. Puzanov AV. Vibration analysis of axial plunger hydraulic machines. Proceedings of the VIII All-Russian Scientific and Technical Conference, 2018: Armament. Technology. Safety. Management. Kovrov: Kovrov State Technological Academy named after V.A. Degtyarev; 2018.
14. Bogdanovich LB. Volumetric hydraulic drives: design issues. Kiev: Technika; 1971.
