from 01.01.2017 to 01.01.2022
Samara, Samara, Russian Federation
from 01.01.2004 to 01.01.2024
Samara, Samara, Russian Federation
VAC 2.6.13 Процессы и аппараты химических технологий
UDK 666.77 Химически стойкие грубокерамические массы и изделия. Кислото- и коррозионностойкие керамические изделия
UDK 666.798.2 Металлокерамические смеси. Керметы
BBK 341 Общая технология металлов
BBK 345 Общая технология машиностроения. Обработка металлов
The study objective is to synthesize sialon powder in the mode of solid-flame combustion of silicon dioxide (sand) - sodium azide – silicon and aluminum halogenide systems. The task to which the paper is devoted is to find out the initial charge composition (choosing from several sand samples the best in terms of the amount of impurities and the gradation factor), which synthesis gives Si3Al3O3N5 sialon in the mode of solid-flame combustion. Research methods used to obtain and analyze the synthesized product in SHS-Az mode: self-propagating high-temperature synthesis using sodium azide and halogenides in SHS-Az laboratory reactor, X-ray fractional analysis on ARL X'trA-138 diffractometer and the study of microstructure by a scanning electron microscope JSM-6390A. The novelty of the work is in the fact that for the first time SHS-Az method is applied to conduct research on the synthesis of sialon from systems which use bank sand as silicon dioxide. The study results on the synthesis of sialon in the mode of solid-flame combustion show that the final product, in addition to β-Si3Al3O3N5 consists of some more phases such as Si3N4: AlN, Si, naf and Na3AlF6. It is found out that during combustion the formed uniform particles of the product are combined into agglomerate. The average size of the particles that make up the product is 180-230 nm. Conclusions: it is found out that Si3Al3O3N5 sialon is obtained in the mode of solid-flame combustion of silicon dioxide (sand) - sodium azide – silicon and aluminum halogenide systems.
sand, sialon, silicon dioxide, precursor, salt halide, sodium azide, SHS
1. Yin L Zhao K, Ding Y, Wang Y, He Z, Huang S. Effect of hBN addition on the fabrication, mechanical and tribological properties of Sialon materials. Ceramics International. 2022;48 (2022):7715-7722.
2. Bolgaru K, Reger A, Vereshchagin V, Akulinkin A. Combustion synthesis of β-SiAlON from a mixture of aluminum ferrosilicon and kaolin with nitrogen-containing additives using acid enrichment. Ceramics International. 2022.
3. Sychev EA, editor. Self-propagating high-temperature synthesis: theory and practice. Collection of Scientific Papers; Chernogolovka: Territory; 2001.
4. Merzhanov AG, Mukasyan AS. Solid flame combustion. Moscow: TORUS PRESS; 2007.
5. Merzhanov AG, Borovinskaya IP. Historical retrospective of SHS: an autoreview. International Journal of Self-Propagating High-Temperature Synthesis. 2008;17(4):242-265.
6. Merzhanov AG. Combustion processes and synthesis of materials. Chernogolovka: ISMAN; 1998.
7. Amosov AP, Borovinskaya IP, Merzhanov AG. Powder technology of self-propagating high-temperature synthesis of materials: textbook. Moscow: Mashinostroenie-1; 2007.
8. Xanthopoulou G, Vekinis G. An overview of some environmental applications of self-propagating high-temperature synthesis. Advances in Environmental Research. 2001;5:117-128.
9. Kheirandish AR, Nekouee KhA, Khosroshahi RA, Ehsani N. Self-propagating high temperature synthesis of SiAlON / Int. Journal of Refractory Metals and Hard Materials. 2015;55:68-79.
10. Niu J, Yi X, Nakatsugawa I, Akiyama T. Salt-assisted combustion synthesis of β-SiAlON fine powders. Intermetallics. 2013;35:53-59.
11. Li Z, Wang Z, Zhu Mengguang, Li Jinfu Zhang, Zuotai. Oxidation behavior of β-SiAlON powders fabricated by combustion synthesis. Ceramics International. 2016;42:7290-7299.
12. Shahien M, Radwan M, Kirihara S, Miyamoto Y, Sakurai T. Combustion synthesis of single-phase -sialons (z = 2-4). Journal of the European Ceramic Society. 2010;30:1925-1930.
13. Yiyao G, Zhaobo T, Ying C, Siyuan S, Jie Z, Zhipeng X. Effect of comburent ratios on combustion synthesis of Eu-doped β-SiAlON green phosphors. Journal of Rare Earths. 2017;35(5):430.
14. Valyaeva ME, Kondratieva LA. Review of methods for obtaining sialon. Sovremennie Materiali, Technika I Technologii. 2021;4(37):10-16.
15. Amosov AP, Bichurov GV. Azide technology of self-propagating high-temperature synthesis of micro- and nanopowders of nitrides: monograph. Moscow: Mashinostroenie-1; 2007.
16. Bichurov GV, Shiganova LA, Titova YuV. Azide technology of self-propagating high-temperature synthesis of micro- and nanopowders of nitride compositions: monograph. Moscow: Mashinostroenie; 2012.
17. Kondratieva LA. Study of sand composition as an initial component of SHS systems for the production of sialon and silicon nitride powders. Sovremennie Materiali, Technika I Technologii. 2021;4(37):24-29.
18. Kondratieva LA. Self-propagating high-temperature synthesis of powders of nitride compositions Si3N4-TiN, Si3N4-AlN, Si3N4-BN, AlN-BN, AlN-TiN, BN-TiN using sodium azide and halide salts [dissertation]. [Samara (RF)]; Samara State Technical University; 2018.
19. Kondratieva LA. Diagram of azide technology of self-propagating high-temperature synthesis of nitride powders. Journal of Technical Research. 2020;6(1):3-9.
20. Kondratieva LA. Study of theoretical calculations and experimental results of studies to obtain sialon powder by SHS-Az method. Sovremennie Materiali, Technika I Technologii. 2020;3(30):27-31.
21. Kondratieva LA. Study of the possibility to obtain silicon nitride powder from sedimentary rock. Sovremennie Materiali, Technika I Technologii. 2019;5(26):62-67.
22. Valyaeva ME, Kondratieva LA. IStudy of the properties of the reaction charge component and its effect on the synthesis of sialon in the combustion mode. High Technologies in Mechanical Engineering: Collection of Scientific Papers of the XVIII Russian Scientific and Practical Conference with International Participation. Samara; 2021.
23. Kondratieva LA. Study of the possibility to obtain sialon powder in the combustion mode (SHS-Az) using bank sand. Sovremennie Materiali, Technika I Technologii. 2020;4 (35):48-53.
