employee
Penza, Penza, Russian Federation
employee
Penza, Penza, Russian Federation
employee
Penza, Penza, Russian Federation
VAC 05.02.02 Машиноведение, системы приводов и детали машин
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.03 Машиноведение и детали машин
Work objective is to solve the urgent problem of increasing the tightness and reliability of pressure couplings during their operation under dynamic loads. Theoretical and experimental studies assessing the impact on the tightness due to roughness nature of mating surfaces and three types of coatings: soft, double-layer and hard have been undertaken. The joints were tested under the influence of axial cyclic load and torque on a bench for accelerated testing. It is established that tightness of pressure couplings during operation under dynamic loads significantly depends on the parameters of microgeometry and physical and mechanical properties of the mating surface material that determine their actual contact area. Recommendations for preparing the surfaces of parts before pressure coupling assembling have been developed. It is proved that the use of regular microrelief and soft galvanic coatings of mating surfaces have a significant effect on the tightness of pressure couplings.
pressure coupling tightness, microgeometry, material and coating of mating surfaces
1. Drozdov, Yu. N. Trenie i iznos v ekstremal'nyh usloviyah: Spravochnik / Yu. N. Drozdov, V. G. Pavlov, V. N. Puchkov. - M.: Mashinostroenie, 1986. - 224 s.
2. Zhabin, A. I. Sborka izdeliy v edinichnom i melkoseriynom proizvodstve/ A. I. Zhabin, A. P. Martynov. - M.: Mashinostroenie, 1983. - 184 s.
3. Volchkevich, L. I. Avtomaty i avtomaticheskie linii/ L. I. Volchkevich, M. M. Kuznecov, B. A. Usov. - M.: Vysshaya shkola, 1976. - Ch. 1. - 225 s.
4. Gorohov, D. B. Obespechenie ekspluatacionnyh svoystv soedineniy detaley mashin / D. B. Gorohov, A. S. Kozhevnikov // Sistemy. Metody. Tehnologii. - 2016. - № 3 (31). - S. 75-80.
5. Berniker, E. I. O raschete posadok s natyagom pri odnovremennom deystvii krutyaschegosya i izgibayuschego momentov / E. I. Berniker // Vestnik mashinostroeniya. - 1968. - № 8. - S. 36-37.
6. Korona, A. B. Raschet sopryazheniy s natyagom s uchetom metoda obrabotki posadochnyh poverhnostey i ih chistoty / A. B. Korona // Stanki i instrumenty. - 1950. - № 9. - S. 22-24.
7. Voyachek I. I. Optimizaciya tolschiny myagkogo pokrytiya, nanesennogo na sopryagaemye poverhnosti detaley nepodvizhnogo soedineniya / I. I. Voyachek, N. E. Kurnosov // Tehnologicheskie metody upravleniya kachestvom detaley mashin i priborov. - Saratov: Izd-vo Saratovsk. un-ta, 1981. - S. 33-34.
8. Gorohov, D. B. Germetichnost' uplotnitel'nyh soedineniy s tonkosloynymi uprugimi pokrytiyami / D. B. Gorohov, A. S. Kozhevnikov // Sovremennye tehnologii. Sistemnyy analiz. Modelirovanie. - 2015. - № 3 (47). - S. 34-40.
9. Kurnosov, N.E. Vliyanie pokrytiy sopryagaemyh detaley na prochnost' soedineniy s natyagom / N. E. Kurnosov, A. V. Tarnopol'skiy // Tehnologiya metallov. - 2019. - № 12. - S. 7-11.
10. Tihomirov, V.P. Germetichnost' metall-metallicheskih uplotnitel'nyh ustroystv / V. P. Tihomirov, M. A. Izmerov // Vestnik Bryanskogo gosudarstvennogo tehnicheskogo universiteta. - 2016. - № 1(49). - S. 89-99.
11. Bezhelukova, E. F. Pribor dlya izmereniya velichiny fakticheskoy ploschadi kontakta v soedineniyah s natyagom / E. F. Bezhelukova, N. E. Kurnosov, S. M. Fel'dberg // Avtomatizaciya proizvodstvennyh processov i unifikaciya apparatury: Sb. nauchn. tr. - Saratov: Izd-vo Saratovsk. un-ta, 1977. - S. 94-97.
12. Ogar, P. M. Osobennosti kontakta zhestkoy sherohovatoy poverhnosti s uprugoplastichnym poluprostranstvom pri razgruzke / P. M. Ogar, V. A. Tarasov, D. B. Gorohov // Sistemy. Metody. Tehnologii. - 2014. - № 3 (23). - S. 41-46.
13. Kurnosov, N. E. Povyshenie prochnosti nepodvizhnyh soedineniy kolesnyh i gusenichnyh mashin za schet ispol'zovaniya cilindricheskih posadok s konturnym soedineniem detaley / N. E. Kurnosov, A. V. Tarnopol'skiy, K. V. Lebedinskiy, A. A. Nikolotov // Nauchno-tehnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta. - 2019. - №3. - S. 320-327.
