ROTARY TURNING REALIZATION UNDER PRODUCTION CONDITIONS
Rubrics: MECHANICAL ENGINEERING
Authors:
1.
Institute of Design and Engineering Informatics of the Russian Academy of Sciences
(Leading Researcher)
Russian University of Transport (Department of Technology of Transport Engineering and Repair of Rolling Stock, Professor)
Moscow, Moscow, Russian Federation
Russian University of Transport (Department of Technology of Transport Engineering and Repair of Rolling Stock, Professor)
Moscow, Moscow, Russian Federation
2.
Ekaterinburg, Ekaterinburg, Russian Federation
3.
Rossiyskiy universitet transporta
Russian Federation
Russian Federation
Type:
Article
Pages:
from 28
to 31
Status:
Published
Received:
28.09.2017
Accepted:
24.10.2017
Published:
24.10.2017
Subject area:
UDK 62 Инженерное дело. Техника в целом. Транспорт
Language:
Russian
Keywords:
rezanie metallov, rezhuschiy instrument, rotacionnoe tochenie, rotacionnyy rezec
Abstract (English):
Opisano ustroystvo dlya rotacionnogo tocheniya s prinuditel'nym privodom instrumenta, obespechivayuschee bystruyu naladku oborudovaniya v proizvodstvennyh usloviyah pri tochenii detaley iz austenitnoy stali 12H18N10T. Pokazany znachitel'nye preimuschestva etogo vida obrabotki po sravneniyu s obychnym tocheniem i rotacionnym rezaniem s samovraschayuschimisya rezcami. Ispol'zovany sleduyuschie metody issledovaniya: empiricheskie metody, eksperiment, metod nablyudeniya.
Opisano ustroystvo dlya rotacionnogo tocheniya s prinuditel'nym privodom instrumenta, obespechivayuschee bystruyu naladku oborudovaniya v proizvodstvennyh usloviyah pri tochenii detaley iz austenitnoy stali 12H18N10T. Pokazany znachitel'nye preimuschestva etogo vida obrabotki po sravneniyu s obychnym tocheniem i rotacionnym rezaniem s samovraschayuschimisya rezcami. Ispol'zovany sleduyuschie metody issledovaniya: empiricheskie metody, eksperiment, metod nablyudeniya.
Keywords:
rezanie metallov, rezhuschiy instrument, rotacionnoe tochenie, rotacionnyy rezec
rezanie metallov, rezhuschiy instrument, rotacionnoe tochenie, rotacionnyy rezec
1. Konovalov, E.G. Progressivnye shemy rotacionnogo rezaniya metallov / E.G. Konovalov, V.A. Sidorenko, A.V. Sous'. - Minsk: Nauka i tehnika, 1972. - 272 c.
2. Gik, L.A. Rotacionnoe rezanie metallov / L.A. Gik. - Kaliningrad: Kn. izd-vo, 1990. - 254 s.
3. Yaschericyn, P.I. Rotacionnoe rezanie materialov / P.I. Yaschericyn, A.V. Borisenko, I.G. Drivotin, V.Ya. Lebedev. - Minsk, 1987. - 229 s.
4. Poduraev, V.N. Rezanie trudnoobrabatyvaemyh materialov: ucheb. posobie dlya vuzov / V.N. Poduraev. - M.: Vyssh. shk., 1974. - 587 s.
