METHODOLOGY IN DEFINITION OF CONROD BEARINGS LIFE OF HEAT-ENGINE
Abstract and keywords
Abstract (English):
The paper reports the sequence of the definition of bearings resource in a crank gear of heatengines. A brief description is given regarding the procedure for the computation of bearing hydromechanical properties in terms of hydrodynamic theory of lubrication and that of the procedure for the definition of an area of contact interaction. The input equations for the computation of dynamics and lubrication are: the equation for the field of hydrodynamic pressures in a lubrication layer separating random loaded surfaces (Reynolds equation); the equations set of plane motion of a shaft journal center; the heatbalance equation manifesting the equality of heat values mean in a cycle of load disseminated in a lubrication layer of a bearing and heat removed by lubricant flowing out in its faces. The procedure for the determination of an area of a contact interaction is developed in accordance with a molecular-mechanical theory of friction and a fatigue theory of wear according to I.V. Kragelsky. The extension of the area of a contact interaction (an area of the violation of a hydrodynamic mode of lubrication) in a slider bearing was defined in terms of the computation of the de-pendence of a minimum thickness in a lubrication layer of a bearing of a connecting rod upper head upon a rotation angle of a crankshaft. At the same time there were taken into account: the non-Newton’s properties of a lubricant; the presence of oil feeding sources on friction surfaces; possible deviations of friction surfaces from a regular form. The procedures presented at the given stage can be used for a comparative assessment of tribocouplings life in heatengines at an initial stage of designing.

Keywords:
bearing for upper head of connecting rod, theoretical resource, hydromechanical properties, contact interaction, wear diagram
Text
Publication text (PDF): Read Download
References

1. RSS 27.002-2009. Reliability in Engineering. Terms and Definitions. - Introd. 2011-01-01. - М.: Standardinform, 2011.- IV, pp. 24.

2. Surkin, V.I. Influence of diesel operation modes upon lubricant parameters of piston pin bearings / V.I. Surkin, Kh.М. Niyazov, Е.А. Zadorozhnaya //Bulletin of SUSU. Series “Mechanical Engineering”. - 2012. ¬- № 12(271). - pp. 97-102.

3. Safonov, P.B. Engineering Tribology: Assessment of Wear-Reasistance and Tribo-Couplings Life: Manual / P.B. Safonov, А.V. Begova. - Mendeleev RCTU, Novomoskovsk Inst., 2004. - pp. 65.

4. Kogaev, V.P. Strength and Durability of Machinery / V.P. Kogaev, Yu.N. Drozdov. - М.: Higher School, 1991. - pp. 319.

5. Rumb, V.K. Prognostication of crankshaft bearings life in ship diesel engines / V.К. Rumb // Propulsion Engineering.- 2009. - № 1. - pp. 15-17.

6. Vencl, A. Diesel engine crankshaft journal bearings failures: Case study / A. Vencl, A. Rac // En-gineering Failure Analysis. - 2014. - Vol. 44. - P. 217-228.

7. Cherepanov, D.А. Computation-Experimental Model of Slider Bearings Wear in ICE: Can.Eng. Thesis / D.А. Cherepanov. - SPb., 2004. - pp. 168.

8. Kragelsky, I.V. Friction Units in Machines: Reference Book / I.V. Kragelsky, М.N. Mikhin. - М.: Mechanical Engineering,1984. - pp. 280.

9. Nikolic, N. A procedure for constructing a theoretical wear diagram of IC engine crankshaft main bearings / N. Nikolic, T. Torovic, Z. Antonic // Mechanism and Machine Theory. - 2012. - Vol. 58. - P. 120-136.

10. Niyazov, Kh.М. Modeling and Optimization of Hydrodynamic Parameters of Piston Pin Bearings in ICE: Can.Eng. Thesis / Kh.М. Niyazov. - Chelyabinsk, 2013. - pp. 161.

11. Prokopiev, V.N. Dynamics and Lubrication of Tribo-Couplings of Piston and Rotor Machines: Monograph / V.N. Prokopiev, Yu.V. Rozhdestvensky [et al.]. - Chelyabinsk: SUSU, 2011. - Vol. 2. - pp. 221.

12. Rozhdestvensky, Yu. Numerical methods for solv-ing «rigid systems» applied for the problem of the dynamics of heavyloaded bearings / Yu. Rozhdestvensky, E. Zadorozhnaya, R. Chuchelov, D. Raskatov // Journal of Computational and Engineering Mathematics. - 2015. - Vol. 2. - № 1. - P. 11-20.

13. Zadorozhnaya, Е.А. Application of non-Newton’s models of lubricating liquids at computation of complexloaded friction units of piston and rotor machines / Е.А. Zadorozhnaya, I.V. Mukhortov, I.G. Levanov // Friction and Lubrication in Machines and Mechanisms. - 2011. - №7. - pp. 22-30.

14. Brandt, A. Multigrid Algorithms for the Solution of Linear Complementarity. Problems Arising from Free Boundary Problems / A. Brandt, Cruir C.W. // SIAM. J. Sci. Stat. Comput. - 1983. - V. 4. - № 4. - Р. 655-684.

15. Prokop´ev, V.N. Multinet integration algorithms of Reynolds equation in the dynamics problems of complex-loaded plain bearings / V.N. Prokop´ev, A.K. Boyarshinova, E.A. Zadorozhnaya // Problemy Mashinostraeniya i Nadezhnos´ti Mashin. - 2005. - № 5. - P. 16-21.

16. Zakharov, S.М. Tribological criteria in assessment of slider bearings capacity for work in crankshafts of internal combustion engines / S.М. Zakharov, I.А. Zharov // Friction and Wear. - 1996. - Vol.17. - № 5. - pp. .606 - 615.

17. Vyrubov, D.N. Internal Combustion Engines: Design and Strength Computation of Piston and Combined Engines: Textbook for students of en-gineering colleges / D.N. Vyrubov, S.I. Efimov, N.А. Ivashenko [et al.]; under the editorship of А.S. Orlin, М.G. Kruglov. - 4-th ed. revised and supplemented - М.: Mechanical Engineering, 1984 - pp. 384.

18. System of tolerances and fits for bushes permanent connection in slider bearings of internal combustion engine camshaft / V.А. Saninsky, Е.I. Rumyantsev, М.P. Gorshneva, Yu.N. Platonova // Current Problems of Science and Education. - 2014. - № 3. - Access mode: http: http://www.scienceeducation.ru/117-13637. (address date: 29.03.2015).

Login or Create
* Forgot password?