1. Penkin NS, Penkin AN, Serbin VM. Fundamentals of Tribology and Tribotechnics: textbook. 3rd ed. Moscow: Innovatsionnoe mashinostroenie; 2021.
2. Ryzhkin AA. Synergetics of tool materials wear during edge cutting machining: monograph. Rostov-on-Don: DSTU; 2019.
3. Ryzhkin, AA. Thermophysical processes during wear of tool cutting materials. Rostov-on-Don: DGTU; 2005.
4. Menga N. Rough contact of sliding viscoelastic layers: numerical calculations and theoretical predictions. Tribology International [Internet]. 2018;122:67–75. Available from: https://doi.org/10.1016/j.triboint.2018.02.012.
5. Cao H. Differences in adhesive wear mechanisms of soft/hard materials caused by varying loads during the friction process. Tribology International [Internet]. 2026;214(A):111157. Available from: https://doi.org/10.1016/j.triboint.2025.111157.
6. Denkena B. Sensitivity of process signals to deviations in material distribution and material properties of hybrid workpieces. The International Journal of Advanced Manufacturing Technology. 2024;130:2649–2659. https://doi.org/10.1007/s00170-023-12807-x
7. Denkena B. Similarity-based anomaly detection method for turning of multi-material workpieces with varying axially constant blank diameter. CIRP Journal of Manufacturing Science and Technology [Internet]. 2025;63:205–213. Available from: https://doi.org/10.1016/j.cirpj.2025.09.014.
8. Bychkovsky VS. Study of the properties and machinability of welded joints using a combined rotary cutter with a chip breaker. Modern Technologies. System Analysis. Modeling. 2018;1(57):16-23.
9. Fominov EV. Assessment of tribodeformational and thermoelectric characteristics of friction during turning of a hybrid part with a welded seam. Friction and Wear [Internet]. 2025;46(2):127–135. Available from: https://doi.org/10.3103/S1068366625700400
10. Fominov E. V. Tribotechnical properties of experimental hard alloys with a modified cobalt binder. Advanced Engineering Research. 2022;22(1):50-56.
11. Mameri A. Effect of Ni aids on the unlubricated tribological behaviour of WC cemented carbides fabricated by pressureless infiltration of Cu alloy binder. Ceramics International [Internet]. 2025;51(3):3115–3125. Available from: https://doi.org/10.1016/j.ceramint.2024.11.287
12. Liang X. Friction and wear behavior of cemented carbide self-matching pairs under different water lubrication conditions. Wear. 2023;523:204832.
13. Silin SS. Methods of similarity in material cutting. Moscow: Mashinostroenie; 1979.



