employee
Bryansk, Bryansk, Russian Federation
Bryansk, Bryansk, Russian Federation
Russian Federation
GRNTI 50.07 Теоретические основы вычислительной техники
BBK 3297 Вычислительная техника
The method of obtaining the volume distribution of phases in structural materials is considered. The technique is based on the layer-by-layer grinding of metallographic samples with photo fixation of microstructure images and the subsequent computer processing of these images. An example of using the developed methodology to study the features of the volumetric distribution of graphite inclusions in high-strength cast irons is presented. The classification of graphite inclusions depending on the shape, size and distribution features is given. The study of the features of the distribution of graphite inclusions led to the conclusion about the patterns and mechanisms of formation graphite phase in cast iron.
visualization, tomography, volume distribution, phase, materials, cast iron, graphite
1. Bunin K.P., Malinochka Ya.N., Taran Yu.N. (1969)Osnovi metallografii chuguna [The Basics of Cast IronMetallograph]. - M., Metallurgy, - 415 p.
2. Cerqueira, F.A. Three-dimensional reconstruction ofcompacted graphite in vermicular cast iron by manualserial sectioning/Fernando Almeida Cerqueira, ArthurSeiji Nishikawa, Wilson Luiz Guesser, Cesar Robertode Farias Azevedo//Metallurgy and Materials, 2015-№3 - p.307-312.
3. Domitner,J. 3D Simulation of interdendritic flowthrough a Al.-18 wt% Cu structure captured with X-raymicrotomography/ J.Domitner, C.Holzl, A.Kharicha etal.// The 3rd International Conference on Advances inSolidification Process, 2012. - p. 1-6.
4. Frolov K.V. (Chairman et al). (1996) Mashinostroenie.Enciklopediy. Izmereniy, control, ispitaniy i diagnostika [Engineering Encyclopedia] Measurements, control,testing and diagnostics.: M, Engineering. -T.III,7 - 464p.
5. Ohser J. 3D-Images of Material Structures. Processingand Analysis/ Jaachim Ohser, Katja Schladitz. -Weinheim: WILEY-VCH Verlag Gmbh@Co K GaA,2009 - 343 p.
6. Panteleyeva V.G., Yegorova O.V., Klikova Ye. (2005)Kompuyternay mikroskopiy [Computer Microscopy] -M., Technosphera, - 304 p.
7. Prusov Ye.S. (2015) Komputernay tomografiy dlyzadach trehmernogo materialovedeniy [Computer Tomography for Tasks of 3D Materials Sciense].Fundamental Research - no 5, pp.318-323.
8. Saai,A. Influence o f volume fraction and distribution ofmartensite phase on the strain localization in dual phasesteels/ A.Saaia, O.S.Hopperstad, Y.Granbom,O.-GLademo// Procedia Materials Science, 2014. №3 -p.900-905.
9. Saltykov, S.A. (1970) Stereometricheskay metallografiy [Stereometrical metallography] - M: Metallurgy, - 376p.
10. Shteinberg S.S. (1961) Metallovedenie Metal Science..Sverdlovsk: Metallurgizdat, 1961 - 598 p.
11. Velichko,A. 3D characterization of GraphiteMorphologies in Cast Iron/ Alexandra Velichko,Christian Holzapfel, Frank Muklich// AdvancedEngineering Materials, 2007-9, №1-2 - p.39-45.
12. Wu Q. Microscope Image Processing/ Qiang Wu,Fatima A.Merchant, Kenneth R. Castleman. -Burlington: Academic Press is an Imprint of Elsevier,2008 - 583 p.
