Science intensive technologies in mechanical engineering Science intensive technologies in mechanical engineering Наукоёмкие технологии в машиностроении 2223-4608 56928 10.30987/2223-4608-2023-1-9-19 Материаловедение в машиностроении Materials science in mechanical engineering Материаловедение в машиностроении Kinetic model of destruction of adhesive bounding of powder coating and metal host material Кинетическая модель разрушения адгезионного соединения порошкового покрытия и металлического субстрата https://orcid.org/0000-0002-8840-248X Соловьев Михаил Евгеньевич Soloviev Mikhail Evgen'evich

доктор физико-математических наук;

doctor of physical and mathematical sciences;

 Раухваргер Алексей Борисович Raukhvarger Alexey Borisovich abrrs@yandex.ru https://orcid.org/0000-0002-1917-7979 Балдаев Сергей Львович Baldaev Sergey L'vovich

кандидат технических наук;

candidate of technical sciences;

 https://orcid.org/0000-0002-9084-8771 Балдаев Лев Христофорович Baldaev Lev Hristoforovich

доктор технических наук;

doctor of technical sciences;

 Ярославский государственный технический университет Ярославль Россия Ярославский государственный технический университет Ярославль Russian Federation Ярославский государственный технический университет Ярославль Россия Yaroslavl State Technical University Yaroslavl Russian Federation ООО «Технологические системы защитных покрытий» Россия ООО «Технологические системы защитных покрытий» Russian Federation ООО «Технологические системы защитных покрытий» Россия ООО «Технологические системы защитных покрытий» Russian Federation 30 01 2023 30 01 2023 2023 1 9 19 25 01 2023 https://bstu.editorum.ru/en/nauka/article/56928/view

Рассмотрена кинетическая модель долговечности адгезионного соединения металлов при нагружении методом нормального отрыва. Приведены результаты исследования влияния параметров соединения на характер изменения концентрации адгезионных связей. Приведены теоретические оценки параметров соединения, при которых обеспечивается безопасный режим долговечности.

Ageing quality kinetic model of adhesive compound of metals, when subjected to loadings by normal fracture method, is viewed. The results of the study of compound parameters effect on the pattern of change in the concentration of adhesive bonds are given. The article presents theoretical prediction of compound parameters for a safe ageing quality mode

 порошковые покрытия адгезионные соединения кинетика разрушения прогнозирование долговечности powder coatings adhesive compounds fracture kinetics ageing quality prediction

Кудинов В.В., Бобров Г.В. Нанесение покрытий напылением. Теория, технология и оборудование. - М.: Металлургия, 1992. - 432 с. Kudinov V.V., Bobrov G.V. Nanesenie pokrytiy napyleniem. Teoriya, tehnologiya i oborudovanie. - M.: Metallurgiya, 1992. - 432 s. Газотермическое напыление / под общей ред. Л. Х. Балдаева. - М.: Маркет ДС, 2007. - 344 с. Gazotermicheskoe napylenie / pod obschey red. L. H. Baldaeva. - M.: Market DS, 2007. - 344 s. Davis J.R. Handbook of thermal spray technology. - ASM International, 2004. - 338 p. Davis J.R. Handbook of thermal spray technology. - ASM International, 2004. - 338 p. Chen Z., Zhou K., Lu X., Lam Y.Ch. A review on the mechanical methods for evaluating coating adhesion. Acta Mechanica. - 2014. - V. 225. - № 2. - P. 431. Chen Z., Zhou K., Lu X., Lam Y.Ch. A review on the mechanical methods for evaluating coating adhesion. Acta Mechanica. - 2014. - V. 225. - № 2. - P. 431. ГОСТ 9.304-87. Покрытия газотермические. Общие требования и методы контроля. - М.: ИПК Изд-во стандартов. - 2001. - 10 с. GOST 9.304-87. Pokrytiya gazotermicheskie. Obschie trebovaniya i metody kontrolya. - M.: IPK Izd-vo standartov. - 2001. - 10 s. ASTM C633-13. Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings. ASTM. West Conshocken. PA. USA. - 2021. - 8 p. ASTM C633-13. Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings. ASTM. West Conshocken. PA. USA. - 2021. - 8 p. Pugacheva N.B., Guzanov B.N., Obabkov N.V., et al. //AIP Conference Proceedings. 2019. - 2176. Pugacheva N.B., Guzanov B.N., Obabkov N.V., et al. //AIP Conference Proceedings. 2019. - 2176. Тушинский Л.И., Плохов АВ., Токарев А.О., Синдеев В.И. Методы исследований материалов. - М.: Мир, 2004. - 384 с. Tushinskiy L.I., Plohov AV., Tokarev A.O., Sindeev V.I. Metody issledovaniy materialov. - M.: Mir, 2004. - 384 s. Bourah D., Robinson B., London T., et al. Experimental evaluation of interfacial adhesion strength of cold sprayed Ti-6Al-4V thick coatings using an adhesive-free test method // Surf. Coat. Technol. - 2019. Bourah D., Robinson B., London T., et al. Experimental evaluation of interfacial adhesion strength of cold sprayed Ti-6Al-4V thick coatings using an adhesive-free test method // Surf. Coat. Technol. - 2019. Зайцев А.Н., Александрова Ю.П., Ягопольский А.Г. Обзор методов оценки прочности сцепления газотермических покрытий // Известия высших учебных заведений. Машиностроение. - 2021. - № 5. - C. 48-59. Zaycev A.N., Aleksandrova Yu.P., Yagopol'skiy A.G. Obzor metodov ocenki prochnosti scepleniya gazotermicheskih pokrytiy // Izvestiya vysshih uchebnyh zavedeniy. Mashinostroenie. - 2021. - № 5. - C. 48-59. WangY.-Y., LiC.-J., OmariA.Influence of substrate roughness on the bonding mechanisms of high velocity oxy-fuel sprayed coatings. Thin Solid Films. - 2005. - V. 485. - PP.141 - 147. WangY.-Y., LiC.-J., OmariA.Influence of substrate roughness on the bonding mechanisms of high velocity oxy-fuel sprayed coatings. Thin Solid Films. - 2005. - V. 485. - PP.141 - 147. White B. C., Story W. A., Brewer L. N., Jordon J. B. Fracture Mechanics Methods for Evaluating the Adhesion of Cold Spray Deposits. Engineering Fracture Mechanics. - 2019. - V. 205. - PP. 57-69. White B. C., Story W. A., Brewer L. N., Jordon J. B. Fracture Mechanics Methods for Evaluating the Adhesion of Cold Spray Deposits. Engineering Fracture Mechanics. - 2019. - V. 205. - PP. 57-69. Asgharifar M., Kong F., Carlson B, Kovacevic R. An Experimental and Numerical Study of Effect of Textured Surface by Arc Discharge on Strength of Adhesively Bonded Joints. Journal of Mechanics Engineering and Automation. - 2012. - V.2. - PP. 229-242. Asgharifar M., Kong F., Carlson B, Kovacevic R. An Experimental and Numerical Study of Effect of Textured Surface by Arc Discharge on Strength of Adhesively Bonded Joints. Journal of Mechanics Engineering and Automation. - 2012. - V.2. - PP. 229-242. Hussain T., McCartney D.G., Shipway P. H., Zhang D. Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components. J. Therm. Spray Technol. - 2009. - V. 18. - № 3. - PP. 364 - 379. Hussain T., McCartney D.G., Shipway P. H., Zhang D. Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components. J. Therm. Spray Technol. - 2009. - V. 18. - № 3. - PP. 364 - 379. Marot G., Lesage J., Démarécaux Ph., et. al. Interfacial indentation and shear tests to determine the adhesion of thermal spray coatings. Surf. Coat. Technol. - 2006. - V. 201. - PP. 2080 - 2085. Marot G., Lesage J., Démarécaux Ph., et. al. Interfacial indentation and shear tests to determine the adhesion of thermal spray coatings. Surf. Coat. Technol. - 2006. - V. 201. - PP. 2080 - 2085. Farhan M. S. A review on adhesion strength of single and multilayer coatings and the evaluation method. Wasit Journal of Engineering Science. - 2016. - V.4. - №.1. - PP. 1-27. Farhan M. S. A review on adhesion strength of single and multilayer coatings and the evaluation method. Wasit Journal of Engineering Science. - 2016. - V.4. - №.1. - PP. 1-27. Gnaeupel-Herold T., Prask H. J., John Barker J., et. al. Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings. Mater. Sci. Eng., A. - 2006. - V. A 421. - PP.77-85. Gnaeupel-Herold T., Prask H. J., John Barker J., et. al. Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings. Mater. Sci. Eng., A. - 2006. - V. A 421. - PP.77-85. Sahab A. R. M., Saad N. H., Kasolang S., Saedon J.Impact of Plasma Spray Variables Parameters on Mechanical and Wear Behaviour of Plasma Sprayed Al 2 O 3 3%wt TiO 2 Coating in Abrasion and Erosion Application. Procedia Engineering 2012. - V.41. - PP. 1689 -1695. Sahab A. R. M., Saad N. H., Kasolang S., Saedon J.Impact of Plasma Spray Variables Parameters on Mechanical and Wear Behaviour of Plasma Sprayed Al 2 O 3 3%wt TiO 2 Coating in Abrasion and Erosion Application. Procedia Engineering 2012. - V.41. - PP. 1689 -1695. Goldbaum D., Shockley J. M., Chromik R. R., et.al. The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats. J. Therm. Spray Technol. - 2012. - V. 21(2). - P. 288-303. Goldbaum D., Shockley J. M., Chromik R. R., et.al. The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats. J. Therm. Spray Technol. - 2012. - V. 21(2). - P. 288-303. Huang R., Fukanuma H. Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits. J. Therm. Spray Technol. - 2012. - V. 21 - № 3-4. - PP. 541 - 549. Huang R., Fukanuma H. Study of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits. J. Therm. Spray Technol. - 2012. - V. 21 - № 3-4. - PP. 541 - 549. Imbriglio S. I., Hassani-Gangaraj M., Veysset D., et.al. Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study. Surf. Coat. Technol. - 2019. - V. 361. - PP. 403-412. Imbriglio S. I., Hassani-Gangaraj M., Veysset D., et.al. Adhesion strength of titanium particles to alumina substrates: A combined cold spray and LIPIT study. Surf. Coat. Technol. - 2019. - V. 361. - PP. 403-412. Регель В. Р., Слуцкер А. Ж., Томашевский Э. Е.Кинетическая природа прочности твердых тел // Успехи физических наук. - 1972. - Т. - 106. - Вып. 2. - С.193 - 228. Regel' V. R., Slucker A. Zh., Tomashevskiy E. E.Kineticheskaya priroda prochnosti tverdyh tel // Uspehi fizicheskih nauk. - 1972. - T. - 106. - Vyp. 2. - S.193 - 228. Glasstone S., Laidler K. J., Eyring H. The Theory of Rate Processes. New York, London: McGraw Hill, 1941. - 611 p. Glasstone S., Laidler K. J., Eyring H. The Theory of Rate Processes. New York, London: McGraw Hill, 1941. - 611 p. Eyring H. Plasticity, and Diffusion as Examples of Absolute Reaction Rates. J. Chem. Phys. - 1936. - V.4. - PP. 283-291. Eyring H. Plasticity, and Diffusion as Examples of Absolute Reaction Rates. J. Chem. Phys. - 1936. - V.4. - PP. 283-291. Tobolsky A., Eyring H. Mechanical Properties of Polymeric Materials. J. Chem. Phys. 1943. - V.11. - PP. 125-134. Tobolsky A., Eyring H. Mechanical Properties of Polymeric Materials. J. Chem. Phys. 1943. - V.11. - PP. 125-134. Busse W. F., Lessig E. T., Loughborough D. L., Larrick L. Fatigue of Fabrics. J. Appl. Phys. - 1942. - V.13. - PP.715 - 724. Busse W. F., Lessig E. T., Loughborough D. L., Larrick L. Fatigue of Fabrics. J. Appl. Phys. - 1942. - V.13. - PP.715 - 724. Бартенев Г.М. Прочность и механизм разрушения полимеров. М.: Химия, 1984. - 280 с. Bartenev G.M. Prochnost' i mehanizm razrusheniya polimerov. M.: Himiya, 1984. - 280 s. Lenhardt M. J., Ong M. T., Choe R., Evenhuis C.R., et. al. Trapping a Diradical Transition State by Mechanochemical Polymer Extension. Science. - 2010. - V. 329. - PP.1057 - 1060. Lenhardt M. J., Ong M. T., Choe R., Evenhuis C.R., et. al. Trapping a Diradical Transition State by Mechanochemical Polymer Extension. Science. - 2010. - V. 329. - PP.1057 - 1060. Kucharski T. J., Boulatov R. The physical chemistry of mechanoresponsive polymers. J. Mater. Chem. - 2011. - V.21. - PP. 8237 - 8255. Kucharski T. J., Boulatov R. The physical chemistry of mechanoresponsive polymers. J. Mater. Chem. - 2011. - V.21. - PP. 8237 - 8255. Makarov D. E. Mechanochemistry of biological and synthetic molecules. J. Chem. Phys. - 2016. - V. 144. - P. 030901. Makarov D. E. Mechanochemistry of biological and synthetic molecules. J. Chem. Phys. - 2016. - V. 144. - P. 030901. Kedziora G. S., Moller J., Berry R., Nepal D. Ab initio molecular dynamics modeling of single polyethylene chains: Scission kinetics and influence of radical under mechanical strain. J. Chem. Phys. - 2021. - V. 155. - P.024102. Kedziora G. S., Moller J., Berry R., Nepal D. Ab initio molecular dynamics modeling of single polyethylene chains: Scission kinetics and influence of radical under mechanical strain. J. Chem. Phys. - 2021. - V. 155. - P.024102. Fertig III R., Douglas K. Physics-based fatigue life prediction of composite structures. NAFEMS World Congress, 2011. - 21 p. Fertig III R., Douglas K. Physics-based fatigue life prediction of composite structures. NAFEMS World Congress, 2011. - 21 p. Naderi M., Michopoulos J., Iyyer N., Goel K., Phan N. Multiscale analysis of fatigue crack initiation life for unidirectional composite laminates. Compos. Struct. - 2019. - V. 213. - P.271- 283. Naderi M., Michopoulos J., Iyyer N., Goel K., Phan N. Multiscale analysis of fatigue crack initiation life for unidirectional composite laminates. Compos. Struct. - 2019. - V. 213. - P.271- 283. Раухваргер А. Б., Язев В. А., Соловьев М. Е. Модель разрушения адгезионного соединения металл-полимер // Химическая физика и мезоскопия. - 2014. - Т 16. - №1. C. 88-92. Rauhvarger A. B., Yazev V. A., Solov'ev M. E. Model' razrusheniya adgezionnogo soedineniya metall-polimer // Himicheskaya fizika i mezoskopiya. - 2014. - T 16. - №1. C. 88-92. Girifalco L.A., Weizer V.G. Application of the Morse Potential Function to Cubic Metals. Phys. Rev. - 1959. - V. 114. - PP. 687- 690. Girifalco L.A., Weizer V.G. Application of the Morse Potential Function to Cubic Metals. Phys. Rev. - 1959. - V. 114. - PP. 687- 690. Neese F. Software update: the ORCA program system, version 4.0. Wiley Interdiscip. Rev.: Comput. Mol. Sci. - 2017. - V. 8. - P. e1327. Neese F. Software update: the ORCA program system, version 4.0. Wiley Interdiscip. Rev.: Comput. Mol. Sci. - 2017. - V. 8. - P. e1327.