student
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
employee
Bryansk, Bryansk, Russian Federation
UDK 62 Инженерное дело. Техника в целом. Транспорт
GRNTI 55.13 Технология машиностроения
The technology of non-galvanized ironing of parts in the electrolyte flow with simultaneous hydromechanical activation of the plated surface is proposed, its advantages over the traditional type of coating are shown. The technological process of coating hydraulic control valve spools has been developed. The technological process of restoring spools consists of the following operations: preliminary surface preparation (mechanical treatment), degreasing, washing, anodic treatment, electrodeposition and final mechanical treatment. The designs of the installation and the electrochemical cell for ironing hydraulic control valve spools, providing optimal hydrodynamic conditions when applying coatings on worn surfaces, are proposed. Optimal modes and composition of ironing electrolyte have been defined, providing a high rate of precipitation growth (1.5...3 mm/h), adhesion strength and wear resistance of coatings. Bench and field tests of hydraulic valves with restored spools were performed, which confirmed the results of laboratory studies and the high efficiency of the proposed technology.
strength, adhesion, microhardness, wear resistance, technological process, cell
1. Yudin, V. M. Vosstanovlenie posadochnyh otverstiy korpusnyh detaley gal'vanicheskimi pokrytiyami / V. M. Yudin, M. N. Viharev, D. B. Slinko // Tehnicheskiy servis mashin. - 2019. - № 4 (137). - S. 152-159.
2. Spicyn, I. A. Vosstanovlenie chugunnyh detaley sel'skohozyaystvennoy tehniki gal'vanicheskim cinkovaniem s mehanicheskoy aktivaciey katodnoy poverhnosti / I. A. Spicyn, V. M. Yudin, Yu. A. Zaharov, I. G. Golubev // Tehnika i oborudovanie dlya sela. - 2020. - № 9 (279). - S. 38-42.
3. Tehnologiya remonta mashin / Pod red. E. A. Puchina. - Moskva: KolosS, 2007. - 488 s.
4. Kisel', Yu. E. Vliyanie dispersnoy fazy na koefficient variacii mikrotverdosti kompozicionnyh elektrohimicheskih pokrytiy / Yu. E. Kisel', G. V. Gur'yanov // Uprochnyayuschie tehnologii i pokrytiya. - 2009. - № 3 (51). - S. 18-20.
5. Kisel', Yu. E. Povyshenie dolgovechnosti detaley sel'skohozyaystvennoy tehniki elektrotermicheskoy obrabotkoy kompozicionnyh elektrohimicheskih pokrytiy: avtoreferat dissertacii na soiskanie uchenoy stepeni doktora tehnicheskih nauk / Yu. E. Kisel'. - Saratov, 2014. - 37 s.
6. Gur'yanov, G. V. Povyshenie iznosostoykosti detaley elektrohimicheskimi splavami na osnove zheleza / G. V. Gur'yanov, Yu. E. Kisel', A. N. Lysenko, A. A. Obozov // Sel'skiy mehanizator. - 2017. - № 2. - S. 34-35.
7. Progressivnye rezhuschie instrumenty i rezhimy rezaniya metallov: spravochnik / V. I. Barannikov [i dr.]. - M.: Mashinostroenie, 1990. - 373 s.
