Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
The study results of the influence of the surface layer of forming rolls on their operational characteristics are presented, the results of comparative tests for contact fatigue of samples machined by grinding and electrochemical sizing are presented, the sequence of sample preparation for experimental studies is considered, recommendations on the choice of final machining method are formulated.
forming rolls, electrochemical sizing, contact fatigue
1. Industrial Engineer’s Reference Book. / A.G. Suslov, V.F. Bezyazichniy, B.M. Bazrov et al. / under the editorship of A.G. Suslov. M.: - Innovation Mechanical Engineering. 2019. - 800 p.
2. Modern Technologies of Shaping. / V.A. Lebedev, A.I. Bol-direv, M.A. Tamarkin et al. - M.: INFRA - M. - 2019. - 320 p.
3. Boldyrev, A.I. Surface Layer Engineering of Products When Electrochemical Sizing and Combined Machining // Bulletin Don State Technical University. - 2009. - vol. 9. - no. 4 (43). - PP. 626-636.
4. Boldyrev, A.I. Experimental Studies of the Surface Layer State after Electrochemical and Mechanical Machining. Bulletin of Voronezh State Technical University. - 2010. - vol. 6. - no. 10. - PP. 15-20.
5. Smolentsev, V.P. Technology of Electrochemical Ma-chining of Internal Surfaces. - M.: Mechanical Engineering. - 1976. - 176 p.
6. Boldyrev, A.I. Influence of the Operating Parameters of the Anodic Dissolution on the Assurance of Electrochemical Shaping Quality // Bulletin of Voronezh State Technical University. - 2017. - vol. 13. - no. 4. - PP. 98-104.
