INFLUENCE OF THE METHOD TO OBTAIN METAL POWDERS ON THE MICROSTRUCTURE AND YIELD OF THE HARD-MAGNETIC ALLOY GRANULATE
Abstract and keywords
Abstract (English):
The characteristics of metal powders of a hard-magnetic alloy produced by various methods are compared. Comparative studies of particles morphology and grain size composition of powders are presented.

Keywords:
hard-magnetic material, permanent magnet, granulate, charge, metal injection molding, metal powders, gas atomization
References

1. German, Randal M., Animesh Bose Injection molding of metals and ceramics. - New Jersy: Metal Powder Industries Federation, 1997. - 413 p.

2. Kostin, D.V., Samboruk, A.R., Kuznets, E.A., Zhukov, S.Yu. Development of Technology to Prepare the Charge of 22X15KA Alloy Powder // Sovremenniye materiali, tekhnika i tekhnologii.  2017. - no. 6 (14). - PP. 31-35.

3. Kostin, D.V., Samboruk, A.R., Kuznets, E.A., Zhukov, S.Yu. Development of 22X15KA Alloy Granulate // Proceedings of the International Scientific and Technical Conference dedicat-ed to the Academician V.N. Antsiferov. - (Perm, november 26-28 2018). - 552 p.

4. Barakhtin, B.K., Zhukov, A.S., Deev, A.A., Voznuk, A.V. Influence of the Chemical Composition of Powder Raw Materials on the Material Strength after Selective Laser Fusion // Metal Science and Heat Treatment. - 2018. - no. 6 (756). - PP. 48-52.

5. Preparation of 25X15KA alloy powders for the synthesis of permanent magnets by selective laser fusion. / I.S. Gavrikov, B.D. Chernishov et all. // Metal Science and Heat Treatment. - 2020. - no. 8. - PP. 25-30.

Login or Create
* Forgot password?