ASSESSMENT OF ROUNDEDNESS DEVIATION IN CYLINDRICAL PARTS AT ORBITAL SMOOTHING
Abstract and keywords
Abstract (English):
The investigation results of orbital smoothing basic parameter impact upon deviations from roundness in strengthened cylindrical surfaces are shown. It is defined that after orbital smoothing a deviation from roundness decreases by two to three times, which has a positive impact upon shape precision increase in strengthened parts.

Keywords:
deviation from roundness, strengthening, orbital smoothing, deforming tool, strengthening modes
References

1. Papshev, D.D. Finish Strengthening with Surface Plastic Deformation. – M.: Mechanical Engineering, 1987. pp. 152.

2. Dunin-Barkovsky, I.V., Kartashova, A.N. Measurement and Analysis of Roughness, Rippling and Non-Roundness of Surface. – M.: Mechanical Engineering, 1978. – pp. 232.

3. Parts Surface Engineering/ authors’ group; under the editorship of A.G. Suslov. – M.: Mechanical Engineering, 2008. – pp. 320.

4. Suslov, A.G. Surface Layer Quality in Machinery. – M.: Mechanical Engineering, 2000. – pp. 320.

5. Suslov, A.G. Parameter State Technological Support of Parts Surface Layer. – M.: Mechanical Engineering, 1987. – pp. 208.

6. Technologist’s Reference Book / under the general editorship of Suslov A.G. – M.: Innovation Mechanical Engineering, 2019. – pp. 800.

7. Dyomkin, N.B., Ryzhov, E.V. Surface Quality and Machinery Contact. – M.: Mechanical Engineering, 1981. – pp. 244.

8. Dyomkin, N.B. Rough Surfaces Contacting. – M.: Science, 1970. – pp. 228.

9. Rakhimyanov, H.M., Semyonova, Yu.S. Technological support of surface quality geometrical parameters at ultrasonic plastic deformation // Metal Processing (technology, equipment, tools). – 2012. – No.3(56). – pp. 33-36.

10. Gorlenko, O.A. Technological support and operation index increase in machinery // Friction and Wear. – 1997. – Vol.18. – No.3. – pp. 361-368.

11. Lebedev, V.A. Efficient Technologies of Surface Plastic Deformation and Combined Processing/ under the editorship of A.V. Kirichek. – M.: “Spectrum” Publishers, 2014. – pp. 403.

12. Zaides, S.A. New methods for surface plastic deformation at machinery manufacturing // Bulletin of Nosov State Technical University of Magnitogorsk. – 2018. – Vol.16. – No.3. – pp. 129-139.

13. Zaides, S.A., Ngo Kao Kyong. Surface Deformation under Narrow Conditions: monograph. – Irkutsk: IRRITU Publishers, 2018. – pp. 236.

14. Technology and Tools for Parts Finish-Strengthening with Surface Plastic Deformation: reference book: in 2 Vol., Vol.1 / under the general editorship of A.G. Suslov. – M.: Mechanical Engineering, 2014. – pp. 480.

15. Zaides, S.A., Bobrovsky, I.N., Fam Van An. Local deformation kinematics impact upon stress state of surface layer // Science Intensive Technologies in Mechanical Engineering. – 2019. – No.5(95). – pp. 32-38.

16. Pat. the RF No.2705043 Device for Surface Plastic Deformation / Zaides S.A., Fam Van An; applied: …; pub-lished: 01.10.2019.

Login or Create
* Forgot password?