AUTOMATED QUALITY SUPPORT OF SURFACE AND CONTACT RIGIDITY IN MACHINERY
Abstract and keywords
Abstract (English):
One of the ways to ensure and increase machining quality is an adaptive mode control of a technological operation. It is necessary to have a simulator for adaptive control system functioning. There are such simulators not for all materials under machining and working conditions. Under production conditions such a problem can be solved at the expense of self-correcting technological system use. The integration of a self-correcting system into an automated system of scientific investigations will allow ensuring required operation properties with a specified accuracy.

Keywords:
adaptive control, self-correcting technological system, machining, contact rigidity, surface layer quality parameters
Text
Publication text (PDF): Read Download
References

1. Petreshin, D.I. Technological support of machinery sur-face quality parameters under conditions of ambiguity // Science Intensive Technologies in Mechanical Engineering. - 2012. - No. 9(15). - pp. 25-27.

2. Suslov, A.G., Petreshin, D.I. Avtomatizirovannoe obespechenie parametrov kachestva poverhnostey, poluchaemyh mehanicheskoy obrabotkoy // Vestnik mashinostroeniya. - 2013. - № 4. - S. 54-58.

3. Suslov, A.G. Machinery Surface Layer Quality. - M.: Mechanical Engineering, 2000. - pp. 320.

4. Suslov, A.G., Petreshin, D.I. Definition of management law for adaptive technological system at specified parameter assurance for machinery surface layer at machining // STIN. - 2010. - No.1. - pp. 30-36.

5. Suslov, A.G., Zakharov, A.E., Petreshin, D.I., Finatov, D.N., Stepa, A.P., Khandozhko, V.A. Automated system for normalized definition of carrying capacity of machinery sur-face layers // Reference Book, Engineering Journal (Appendix). - 2003. - No. 9. - pp. 21-24.

6. Suslov, A.G. Technological Support of Machinery Sur-face Layer State Parameters. - M.: Mechanical Engineering. 1987 - pp. 208.

7. Parts Surface Engineering/ A.G. Suslov [et al.]; under the editorship of A.G. Suslov. - M.: Mechanical Engineering, 2008. - pp. 320.

8. Medvedev, D.M., Khandozhko, V.A. Automated tech-nological support of contact rigidity in grinded surfaces of machinery and their joints // Bulletin of Bryansk State Tech-nical University. - 2015. - No.2. (46). - pp. 40-49.

9. Suslov, A.G., Medvedev, D.M. Single-stage technologi-cal support of wear-resistance in machinery cylindrical surfac-es // STIN. - 2010. - No. 8. - pp. 22-25.

10. Method for Normal Contact Rigidity Definition in Fixed Joints: methodical recommendations. - M.: ARRIMACH, 1982.

11. Suslov, A.G., Petreshin, D.I. Automated support of quality parameters in surfaces obtained by machining // Bulle-tin of Mechanical Engineering. - 2013. - No. 4. - pp. 54-58.

Login or Create
* Forgot password?