Abstract and keywords
Abstract (English):
Technological potentialities at finish-strengthening processing of low-rigid parts of shaft- and axle types with local ways of machining impact are rather limited. In the paper there are considered new ways for strengthening allowing obtaining qualitative surface strengthening in machine parts at high productivity of an engineering procedure.

Keywords:
surface plastic deformation, oscillating smoothing, centrifugal processing, external strengthening, cross running-in
References

1. Odintsov, L.G. Parts Strengthening and Finishing with Surface Plastic Deformation. - M.: Mechanical Engineering, 1987. - pp. 328.

2. Zaides, S.A., Zabrodin, V.A., Muratkin, V.G. Surface Plastic Deformation. - Irkutsk: ISTU Publishing House, 2002. - pp. 304.

3. Suslov, A.G. Surface Layer Quality in Machinery. - M.: Mechanical Engineering, 2000. - pp. 320.

4. Zaides, S.A. External Surface Plastic Deformation. - Ir-kutsk: IrSTU Publishing House, 2001. - pp. 311.

5. Gallager, R. Finite Element Method. - M.: World, 1984. - pp. 430.

6. Zaides, S.A. Residual Stresses and Quality of Gage Metal. - Irkutsk: Publishing House of Irkutsk State University, 1992. - pp. 200.

7. Pshybylsky, V. Technology of Surface Plastic Processing: transl. from Polish. - M.: Metallurgy, 1991. - pp. 479.

8. Oteny, Ya.N. Technological support of machinery quali-ty with surface plastic deformation: monograph. - Volgograd: Volgograd Polytechnic, 2005. - pp. 224.

9. Zaides, S.A., Gorbunov, A.V. Stress-strain properties definition in surface layer of low-rigid shafts strengthened with surface plastic deformation // Strengthening Technologies and Surfaces. - 2015. - No.3 (123). - pp. 15-19.

10. Shchukin, V.Ya. Fundamentals of Cross-Wedge Rolling / under the editorship of A.V. Stepanenko. - Mn,: Science and Engineering, 1986, - pp. 223.

11. Zaides, S.A., Fam Dak Fyonk. Assessment of stressed-deformed state in cylindrical parts after cross rolling with plates // Science Intensive Technologies in Mechanical Engi-neering. - 2017. - No.5(71). - pp. 38-43.

12. Pat. RF for invention No. 2600302. Device for cylin-drical products rolling with flat tools // Zaides S.A., Fam Dak Fyong. Published 20.10.2016. Bull. No.29.

13. Parts Processing with Surface Plastic Deformation: monograph / under the editorship of S.A. Zaides. - Irkutsk: IrSTU Publishing House, 2014. - pp. 559.

14. Schneider, Yu.G. Technology of Pressure Finishing: reference book. - S-Pb: Polytechnica, 1988. - pp. 414.

15. Smelyansky, V.M. Mechanics of Parts Strengthening with Surface Plastic Deformation. - M.: Mechanical Engineering. 2002. - pp. 299.

16. Zaides, S.A., Nguen Van Hin. Oscillating smoothing parameter impact upon roughness of strengthened parts // Bulletin of IrSTU. - 2017. - No.4. - pp. 22-29.

Login or Create
* Forgot password?