DESIGN AND TECHNOLOGICAL SOLUTIONS FOR REALIZATION OF METHOD OF LEVELING AND MECHANICAL STABILIZATION OF LONG-LENGTH CYLINDRICAL PARTS
Abstract and keywords
Abstract (English):
In the paper there are described the works of different authors and offered by them methods of leveling and geometrical parameters stabilization in long-length weak-rigid parts. Drawbacks of methods declared are revealed and the necessity in the development of the procedure of residual stresses leveling in long-length weak-rigid parts of a "shaft" type based on a probabilistic simulator formation is shown.

Keywords:
leveling, residual stresses, geometrical parameters stabilization
References

1. Pat. 2525023 RF, B24B39/04, B21D3/16. Method of soft long-length leveling / Kropotkina E.Yu., GrigorievS.N., Volosova M.A.; FSBEI HVE “Moscow State Technological University “STANKIN”. – 201215686/02; applied 26.12.2012; published 10.08.2014;

2. Pat. 2254192 RF, B21D3/16. Method for vibration processing of axisymmetric long-length parts and device for its carrying out / Rastorguev D.A., Drachev O.I., Soldatov A.A.; SEI HVE “Togliatti State University” – 2003136836/02; ap-plied 19.12.2003; published 20.06.2005;

3. Pat. 2020012 RF, B21D3/16. Device for blank leveling and strengthening / Buravtsev S.K.; Buravtsev Sergey Kons-tantinovich. – 5051932/27; applied 13.07.1992; published 30.09.1994;

4. Pat. 2021098 RF, B24B39/04, B21D3/16. Method for soft shaft machining / Mazur V.K., Muratkin G.V.; Produc-tion-Commercial Company “Teko Ltd.” – 5024781/27; applied 01.07.1991; published 15.10.1994.

5. Pat. 2380212 RF, B24B39/04, B21D3/16. Method for soft shaft machining / Muratkin G.V., Kotov I.V., Sintsov A.S.; State Educational Institution of Higher Vocational Edu-cation “Togliatti State University” – 2008122826/02; applied 05.06.2008; published 27.01.2010.

6. Pat. 2416475 RF, B21D3/16. Plant for low-rigid parts vibroprocessing / Boichenko O.V., Drachev O.I., Granchenko D.V.; State Educational Institution of Higher Vocational Edu-cation ”Togliatti State University” – 2008139175/02; applied 01.10.2008; published 20.04.2011.